The end run around the 2nd Amendment is almost complete.
The blogosphere is sounding off about a pending new Obama policy that would impact not only the 2nd Amendment, but the 1st Amendment as well.
As incredible as it seems, individuals would be in violation by “merely posting information on the Internet about common firearms” which “could be interpreted as illegally sharing sensitive information with foreign nationals”
Under the new proposal from the State Department, merely posting information on the Internet about common firearms could be interpreted as illegally sharing sensitive information with foreign nationals. So Mr. Obama’s plan is two-for-one in restricting constitutional rights: He would combine gun control with control over free speech.
And the penalty for violating this policy could be drastic if upheld:
The penalty? 20 years in prison plus a $1 million fine for each violation.Each time that any foreign national accesses the data is considered a separate violation.
Rest of story here –> http://govtslaves.info/new-obama-policy-would-make-merely-posting-firearm-information-on-the-internet-a-crime/
OH, BTW … below is the MG3 Machine Gun … a general purpose machine gun manufactured by a German firm, introduced in the 1950s … with a 7.62mm caliber, effective range of 1200m and with rate of fire of 1000-1300 rounds per minute. I wonder if the Chatham copfuks will pay me a visit for sharing this?
How low the govt will go is amazing, just when i thought it was as low as possible, they discover a new absolute zero…
EXACTLY the way I feel harry p.! Get’s worse and worse by the day … and yet I still am surprised by it.
I also notice you did not post a picture of a gun. Chickenshit.
Sup Stuck?
Yeah, I caught this… bunch of dogshit statist thugs…
By the way, the MG3 is just a modification of the MG42. All they did was swap barrels from the German 8mm to 7.62X51 and slow down the rate of fire from 1500 to just over 1000… Me and my Joes qual’d on it back in the late 90’s…
Semi-funny story: We were cross-training with the KSK and they had a bunch of these MG3’s.
The thing is – the Germans did not make new MG3’s after WWII – they simply rebarreled the old MG42’s and gave them a new finish. Same receiver, same guns used in WWII.
So, everyone’s lining up to get under these MG’s, when it suddenly dawns on me…
I turn and ask one of the Germans:
Me: “Hey… I have a couple questions.”
Herm: “Yes, what is it?”
Me: “These MG3’s used to be MG42’s, yes?”
Herm: “Correct.”
Me: “And they were used in WWII, yes?”
Herm: “Correct.”
Me: “So, what I want to know is – were these guns used to shoot Americans or not? Because if they were, I’m not shooting them and neither are my troops.”
Herm looks at me for a second, then the realization hits him too – they were having us shoot and qualify on machineguns that might have been used to slaughter our own guys!
INSTANT halt on everything… the command Herms went into a huddle for about 10 minutes. I can tell by body language that there’s two factions: The first is the “Who fuckin’ cares? Just have them shoot” bunch, and the “Hey, he’s got a point and that is sort of fucked up” faction.
After some hushed and agitated conversation, some running to and fro, one of the Herms comes back with some paperwork which he shows to their ranking guy… a consensus is reached.
Herm comes back to me.
Herm: “No, these were used on the Western Front to shoot Russians”..
Us: “Oh, well that’s okay then…”
We qualified and got our Schützenschnur medals…
Stucky,
i rarely take pics or acknowledge what i posess.
I dont partake in the forums much anymore, better to read and learn anyway.
This reaffirms why paper books are so important, they might take away the websites but we will still have our reloading manuals. It cracks me up because they pretend it is a secret, shit you can buy mats to assemble a firearm on for $10 that show an exploded view of an AR15. Any reasonably mechanically inclined person could assemble from those diagrams.
A very similar tactic is going on inregards to the EO’s (essential oils). Though I am no fan they have drawn the ire of the FDA and many sites are shutting down their recipes and proposed treatments (similar to when Gen Mills said Cheerios can help lower choleserol). It amazes me how the 1st anendment is being steamrolled yhese days. I fear it will be ramped up further via fear statements.
Whether it is this, the TPP, niggers being moved into good neighborhoods with money stolen from those people, 11 yo’s being kidnapped by CPS, or copfuks murdering people it gets harder and harder to stay positive especially when surrounded by people who make bb look like a moral, freedom loving member of MENSA.
Billy, I hope you know the Russians were fought on Germany’s Eastern Front.
How do I obtain an MG3, illegally?
This is much Ado about nothing. The clowns were already sent packing over PGP. There is not yet a court whose idiots in robes are stupid enough to go along with such asinine folly.
“This is much Ado about nothing.” —— dc.sunsets
You are certainly correct, for now … cuz you said “There is NOT YET a court”.
That’s how this shit starts, isn’t it? Introduce a fucking ridiculous law … they know it will be defeated … but, it sets the tone …. the next time they introduce it then it won’t seem quite as ridicules … rinse and repeat as needed … and then one day — “Hey! This law makes sense!!”
@Billy …. haha funny story
@ dc,
Yep… I caught that about one second after I hit “post”… no way to go back and change it… doom on me.
DOH!!!
koko,
Why would you want one?
Compared to the MG34, the MG3/MG42 is a piece of stamped sheet metal trash… cyclic rate still way too high, the fucking bipod is all sorts of hinkey to work with – you have to keep shoving forward to keep it from folding up on its own and putting the muzzle in the dirt, it only operates in full auto mode…
The ’34 runs like a sewing machine compared to the ‘3/42… they stopped making it because it’s too expensive to make, milled tool steel and the intricate machining takes a long time… not because it was a poor design or the 42/3 was “better”…
As far as getting one “illegally”? You’re on your own… I don’t have the faintest idea, and even if I did I wouldn’t tell anyone… not going to touch that radioactive stinkburger with a barge pole…
I’ll stick wif my semi-auto M1A, thank you. However, if an American Citizen wants a select fire rifle, he/she should be able to go to the LGS and buy one. For the same price as a semi-auto one. This proposal is outright censorship and simply cannot be tolerated.
“Under the new proposal from the State Department, merely posting information on the Internet about common firearms could be interpreted as illegally sharing sensitive information with foreign nationals. So Mr. Obama’s plan is two-for-one in restricting constitutional rights: He would combine gun control with control over free speech.”
—-from the article
Hmmm. Let me see. Ok, let’s try this. MP5.
Is it a violation to mention a globally popular FOREIGN-made (German) weapon used in literally dozens and dozens of countries, from Iran to the U.S.? That ought to keep the State Department lawyers scratching their heads for a while. I’m such a rebel.
Considering that just about every tidbit of info that IS available about “common firearms” is ALREADY posted on the interwebz, and some of it is on govt websites, doesn’t that mean that these people are already fucking guilty? Gotz to keep dem fo profit prisons full up!
I’m not surprised by it but the govt becomes more fucking stupid by the minute! At this rate the govt will surpass bb’s level of stupid in…….I don’t know…….three or four years!
And no one has yet commented on guns in military aircraft.
Shit…blackshirts at the door…
https://tails.boum.org/
How about hot women and guns? Double-whammy!
[img
[/img]
When this type of tyranny happens on top of cash restrictions, you can bet collapse is nigh.
I doubt that these clowns have any idea of the info available from the US Patent Office. 🙂
Hmm…having fired several dozen different machine guns a few weeks ago …I’d opt for the A1919…very effective.
https://www.youtube.com/watch?v=VinQ_JZe29U
Bucky,
I approve! Somewhere, the ghost of John Browning just popped a boner…
When Saint John was trying to sell his awesome shit-wrecking machine made of Unicorn Farts and Win to the Army, I read somewhere he just linked like 50,000 rounds together, then sat behind the gun and held the trigger down… some kid next to him with a garden rake to clear away the mountains of empties…
The MG mowed through crates of ammo with no problems… no stops. At all. Not even for lunch.
The Army bought the gun.
I actually just got a warning from Microsoft to not continue to this site because of security concerns. I hit the “Continue to site” option (“not recommended” per Microsoft). I’m such a rebel.
The site went down earlier today. There is some issue with Cloudflare and the site is currently unprotected from attack. That is why you are getting that message.
I got the same warning message moments ago …. only issued from the Firefox browser … which has never happened before.
Same here Stuck…
I’m guessing our reputation as a bunch of IDGAF shit-wreckers is getting around…
Good.
I’m really not that savvy with computers, but I don’t think it’s a good signal when the likes of Stucky, Billy, and me get the same warning message about continuing to this article and thread. Maybe one of you Internet geniuses can explain it, but I’m not currently comfortable with this shit.
Me too with the warning. Admin is one step closer to a FEMA camp. He must be doing something right.
Have you checked on the Man With No Name lately? He’s ok?
There is no danger logging into my site. The Man with No Name is working with Cloudflare to rectify the problem.
The problem has been fixed. You shouldn’t get any more warnings.
Same problem here with Firefox when I try to log in. It`s a stern warning about the some site certificate. I will try to post some details.
Says: “site untrusted”
http://www.theburningplatform.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. The certificate is only valid for *.theburningplatform.com/CN=theburningplatform.com (Error code: sec_error_unknown_issuer)
If I push it with the log in I get this: “If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn’t continue.”
I wrote this comments after another attempt to log in so the problem persists.
[url
[/img][/url]